ANSI/BIFMA X5.1 - 2017 General-purpose Office Chairs
时间：2020-09-17 访问量：6737
| Edition: 20200621 更新 | ||||||||
| Section | Section Description | Summary of important content | 重要内容摘要 | |||||
| 1 | Scope | 1. NHANES 2007-2010 study, which indicates the weight of the 95th percentile male is 125 kg (275 pounds), was used in the development of the tests. 2. The tests were developed with an estimated product life of ten years based on single-shift usage. 3. ISO 17025 requirements for measurement uncertainty do not apply to this standard. | 1. NHANES 2007-2010年的研究表明，95%的男性的体重为125公斤(275磅)，本标准的加载重量采用了这个数据。 2. 本标准规定的测试参数是基于产品寿命估计为10年的日常办公使用情况拟定的。 3. 有关ISO 17025 测量不确定度的要求不适用于本标准。 | |||||
| 2 | Definitions | 1. Arena folding chairs are not covered in the ANSI/BIFMA X5.1 standard. 2. Standard folding chairs are not covered in the ANSI/BIFMA X5.1 standard. | 1. 竞技场折叠椅不在本标准规管范围内。 2. 标准折叠椅不在本标准规管范围内。 | |||||
| 3 | General | In order for measurements to be "universally" acceptable, only Chair Measuring Devices (CMD) built to BIFMA or ISO specifications may be used. | 为了使测量数据能够被广泛接受，只有通过符合BIFMA或ISO的座椅测量装置(CMD)（测试的数据）才能被认可。 | |||||
| 4 | General test conditions | |||||||
| Section | Section Desc | 章节内容 | KW Model | KW Model Desc | 仪器名称 | 图片 | 产品资料 | 操作视频 |
| 1 | Scope | 范围 | / | / | / | / | / | |
| 2 | Definitions | 定义 | / | / | / | / | / | |
| 2.4 | CMD | 美标坐具尺寸测量加载治具 | KW-BFM-01 | BIFMA Chair Measuring Device （CMD） | 美标坐具尺寸测量加载治具(俗名：BIFMA CMD) |  |  | |
| KW-BSE-60 | ISO CMD | ISO CMD |  | |  | |||
| 2.10 | Form-fitting device | 靠背加载垫 | KW-BFM-03 | Chair Back Form-fitting Device | BIFMA坐具靠背加载垫 |  | | |
| 3 | General | 一般要求 | / | / | / | / | / | |
| 4 | Types of Chairs | 办公椅分类 | / | / | / | / | / | |
| 5 | Backrest Strength Test - Static - Type l and II | 第I和II类办公椅的靠背强度测试 | KW-BFM-13 | Chair strength tester for BIFMA | BIFMA坐具结构强度试验机 |  | | |
| 6 | Backrest Strength Test - Static - Type lll | 第III类办公椅的靠背强度测试 | KW-BFM-13 | Chair strength tester for BIFMA | BIFMA坐具结构强度试验机 | | | |
| 7 | Drop Test - Dynamic | 动态强度冲击测试 | KW-BFM-11 | Seating Impact Tester | 坐具座面冲击测试机 |  | | |
| 8 | Swivel Test - Cyclic | 旋转耐久测试 | KW-BFM-09 | Chair swival test rig | 椅子旋转耐久测试机 |  | | |
| 9 | Tilt Mechanism Test - Cyclic | 后倾机构耐久测试 | KW-BFM-10-BP | Chair backrest tester for BIFMA - Back pull | 椅子靠背耐久测试机-后拉式 |  | | |
| KW-BFM-10-FP | Backrest tester for BIFMA III chair - Front push | 椅子靠背耐久测试机-前推式 |  | | ||||
| 10.3 | Seating Durability Tests - Cyclic | （座面）冲击耐久测试 | KW-BFM-11 | Seating Impact Tester | 坐具座面冲击测试机 |  | | |
| 10.4 | eating Durability Tests - Cyclic | （座面）前角交替压力耐久测试 | KW-BSE-16 | Arm rest tester | 坐具扶手试验机 |  | | |
| 11.3 | Stability Tests - Front Stability | （办公椅）后倾稳定性测试 | KW-BFM-05-MS | Chair Rear Stability Test Disc | 坐具后稳定性测试加载模块 |  | | |
| KW-BFM-05-PP | Support PP sheet for reclining seat of back rest stability testing | 具有靠背后倾机构的坐具后稳定性测试加载塑胶膜片 |  | | ||||
| KW-BFM-46 | Template for rear stability test of BIFMA X5.1 | BIFMA坐具后稳定性加载点模板 |  | | ||||
| 11.4 | Stability Tests - Front Stability | （办公椅）前倾稳定性测试 | KW-BFM-12 | Seating stability test table for single station | 单工位坐具稳定性测试台 |  | | |
| KW-BFM-12-03-BFM | Seating stability loading pad for BIFMA | 坐具前稳定性测试辅助加载制具-BIFMA |  | | ||||
| KW-BFM-12-06 | Unit of loading mass & fixture for single seating stability testing | 座位坐具稳定性加载砝码和治具套装 |  | |||||
| KW-BFM-47 | Front Stability Load Locator Fixture | 椅子前稳定性测试加载点确认治具 |  | | ||||
| 12 | Arm Strength Test - Vertical - Static | 扶手垂直强度测试 | KW-BFM-13 | Chair strength tester for BIFMA | BIFMA坐具结构强度试验机 |  | | |
| 13 | Arm Strength Test - Horizontal - Static | 扶手水平强度测试 | KW-BFM-13 | Chair strength tester for BIFMA | BIFMA坐具结构强度试验机 | | | |
| 14 | Backrest Durability Test - Cyclic - Type I | 第I类（办公椅）靠背耐久测试 | KW-BFM-10-BP | Chair backrest tester for BIFMA - Back pull | 椅子靠背耐久测试机-后拉式 |  | | |
| 15 | Backrest Durability Test - Cyclic - Type II & III | 第II和III类（办公椅）靠背耐久测试 | KW-BFM-10-BP | Chair backrest tester for BIFMA - Back pull | 椅子靠背耐久测试机-后拉式 | | | |
| KW-BFM-10-FP | Backrest tester for BIFMA III chair - Front push | 椅子靠背耐久测试机-前推式 | | | ||||
| 16 | Caster/Chair Base Durability Test - Cyclic | （办公椅）脚轮耐久测试耐久测试 | KW-BFM-17-1 | One-station Chair caster durablity tester | 单工位椅子脚轮耐久测试机 |  | | |
| KW-BFM-17-2 | Two-stations Chair caster durablity tester | 双工位椅子脚轮耐久测试机 |  | | ||||
| KW-BFM-17-4 | Four-stations Chair caster durablity tester | 四工位椅子脚轮耐久测试机 |  | | ||||
| 17 | Leg strength Test - Front and Side Application | （第III类办公椅）椅腿强度测试 | KW-BFM-13 | Chair strength tester for BIFMA | BIFMA坐具结构强度试验机 | | | |
| 18 | Footrest Static Load Test - Vertical | （办公椅）脚踏垂直强度测试 | KW-BSE-16 | Arm rest tester | 坐具扶手试验机 |  | | |
| 19 | Footrest Durability Test - Vertical - Cyclic | （办公椅）脚踏垂直耐久测试 | KW-BSE-16 | Arm rest tester | 坐具扶手试验机 | | | |
| 20 | Arm Durability Test - Cyclic | 扶手耐久测试 | KW-BSE-16 | Arm rest tester | 坐具扶手试验机 | | | |
| 21 | Out Stop Tests for Chairs with Manually Adjustable Seat Depth | 座面具有滑动功能的撞击测试 | KW-BFM-62 | Out Stop Tests for Chairs with Manually Adjustable Seat Depth | 椅子座面滑动撞击测试机 | |||
| 22 | Tablet Arm Chair Static Load Test | （附着在办公椅上的）写字板结构强度测试 | KW-BFM-10-FP | Backrest tester for BIFMA III chair - Front push | 椅子靠背耐久测试机-前推式 |  | | |
| KW-BFM-54 | Load pad for BIFMA tablet | 直径8寸加载垫 | ||||||
| 23 | Tablet Arm Chair Load Ease Test - Cyclic | （附着在办公椅上的）写字板循环静载测试 | KW-BFM-10-FP | Backrest tester for BIFMA III chair - Front push | 椅子靠背耐久测试机-前推式 | | | |
| KW-BFM-54 | Load pad for BIFMA tablet | 直径8寸加载垫 | ||||||
| 24 | Structural Durability | （第III类办公椅）摇晃耐久测试 | KW-BFM-49 | Structural durability test for BIFMA III chair | 第三类椅子摇晃耐久试验 | |||
| Appendix C | Base Test - Static | （办公椅）五星脚耐压力测试 | KW-BFM-07 | hair Base Comprssion Tester | 椅子五星脚耐压力试验机 |  | | |
| Appendix D | Front Stability Load Locator Fixture | （办公椅）前稳定性加载点定位治具 | KW-BFM-47 | Front Stability Load Locator Fixture | 椅子前稳定性测试加载点确认治具 |  | | |
| Appendix F | Template for Rear Stability | （办公椅）后稳定性加载点定位模板 | KW-BFM-46 | Template for rear stability test of BIFMA X5.1 | BIFMA坐具后稳定性加载点模板 |  | | |
售前咨询专员